Тогда привожу дословно:
Well guys this I wrote on the 5th of july in another thread here"front lens slots":
Quote:
Posted: 05 July 2004 at 12:39pm | IP Logged
Well the ring around the lens with the indents is weaker at those points. If it isn't assembled right and has to much pressure on other area it can be deformed. Like it was in the case of my first Pro1. The front element masked that the ring and lens was not mounted straight. This was because of too much glue(silicon) between one of the clamps, resulting in slight deformation which let the dust and the small drop of cleaner through. If the front piece is assembled right there's no problem with dust.
Источник:
http://www.powershotpro1.com/forum....1&TPN=4 Последнее сообщение на странице.